Makita AN923 Manuel D'instructions page 10

Cloueuse pneumatica
Masquer les pouces Voir aussi pour AN923:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Noise
The typical A-weighted noise level determined according
to EN792:
Model AN923
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Model AN943
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration emission value determined according to
EN792:
Model AN923
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model AN943
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Pneumatic Framing Nailer
Model No./ Type: AN923, AN943
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN792
10
ENG905-1
): 89 dB (A)
pA
): 102 dB (A)
WA
): 92 dB (A)
pA
): 105 dB (A)
WA
ENG904-1
2
): 4.0 m/s
h
2
2
): 3.5 m/s
h
2
ENG901-1
ENH003-13
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
Tomoyasu Kato
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
30.1.2009
Director

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

An943

Table des Matières