44
Installation
1.
Screw the top handle bracket to the
handle rod.
2.
Fit the bottom handle bracket on the
lower left-hand side of the door.
3.
Fit the top handle bracket on the top
left-hand side of the door.
4.
Screw the handle rod to the bottom
handle bracket.
Do not use excessive force and overtighten
the screws (max. 2 Nm) as you may damage
the door handles.
Levelling
When placing the appliance ensure that it stands
level. If necessary adjust the feet using the adjust-
ment spanner supplied.
Door alignment is dependent on proper levelling.
Installation of the Taste Guard Filter
The Taste Guard Filter is an active carbon filter which absorbs bad odours maintain the best
flavour and aroma for all foodstuffs without risk of odour cross contamination.
On delivery the carbon filter is in a plastic bag to preserve performance.
1.
Open the air lever flap.
2.
Take the filter out of the plastic bag.
All manuals and user guides at all-guides.com
1
2
3
4