AIPTEK MobileCinema A50P Guide De L'utilisateur page 13

User's Manual
Troubleshooting
Symptom
The projector can not be turned
on.
The projecting image is too dark. * Use the Projector in a darker
The projecting image is too
blurry.
The temperature of the
projector's surface is warm.
The projector can't project from
or charge MHL devices
The projector cannot be
charged.
The projector is turned on, but
the video can not be projected.
Check Point
Ensure the battery is fully charged.
environment.
* Decrease the size of projecting
image.
Adjust the focus by using focus wheel.
It is normal that this projector to generate
moderate heat during operation.
MHL supported product list can be found:
http://www.mhlconsortium.org/productlist/
It's not a guarantee to 100% compatible
as the MHL interface design may vary by
each mobile device vendor. It's
recommended to check the compatibility.
Please check if the projector's 3 LED
indicators are in Marquee. If not and they
are blinking, please press charging mode
button again to exit the charging mode
for MHL device.
Please check your device if it supports
MHL or HDMI interface. If yes, please
check the source resolution of your
device output. Please refer the
supporting resolution to Appendix 1 and
modify your device output resolution.
7