Table Des Matières; Technical Data; Environmental Aspects - ensto ECO10R Instructions D'installation Et De Fonctionnement

6.

TECHNICAL DATA

ECO10R, ECO10F, ECO10FS and ECOINTRO10F
Supply voltage
Switch contact
Operating temperature range
Temperature reduction
Signal light B
Floor sensor
Floor sensor resistance values
Circuit breaker/fuse
Power in standby
Type
ECO10R
ECO10F
ECO10FS
ECOINTRO10F
Thermostat can control external relay.
7. WARRANTY
The warranty period for Ensto ECO thermostats is 2 years from the date of purchase but no longer than 3
years from the date of manufacture. Warranty conditions, see the product card www.ensto.com.
8.

ENVIRONMENTAL ASPECTS

The product's cardboard packing is suitable for recycling.
When a heating system is at the end of the life cycle the cables, conduits and electronic compo-
nents must be disposed of properly according to local recycling guidelines.
9. FIGURES
1. Connection diagram
2. Connection of wires to the thermostat
3. User interface of the thermostat
4. Installation and uninstallation
5. Calibration of the adjustment knob
6. Temperature reduction fixed -4°C
7. Limitation of adjustment range
12
All manuals and user guides at all-guides.com
230 V -15%, +10%, 50 Hz
2-pole
-20 ... +30 °C
fixed -4 °C, control 230V
green: thermostat on, heating off
red: heating on
NTC, 47 kΩ at 25°C, cable 4 m (extendable to 10 m)
see page 2, table 1 (the sensor is not connected)
max. 16A
5 W
Temp. range Nom. current (res.)
5 - 35 °C
10 - 60 °C
10 - 35 °C
10 - 60 °C
RAK40 / © Ensto 2019
Max load
10A 2300W
10A 2300W
10A 2300W
10A 2300W
Protection class
IP30
IP31
IP31
IP31