WARNING: Do not install the heater near curtains
•
and other combustible materials.
Do not use the appliance to dry clothing.
•
Never insert objects into the appliance and do not
•
block the air vents.
Never operate the appliance if the cord or plug are
•
damaged. Consult the manufacturer's authorised
repair service or an electrician for any work.
This appliance is intended for household use only.
•
Only use the appliance as specified in the manual.
•
Any other use may cause accidents.
The most common cause of overheating is dust
•
deposit in the appliance's ventilation grilles. Clean
it regularly (see maintenance section).
To avoid any risk of burns, never touch hot surfaces
•
on the appliance.
To move the appliance, set the switches to position 0.
•
Use the appliance on a horizontal surface. Never
•
use the appliance in an inclined or lying position.
Fully unwind the power cord before use.
•
The appliance should never be used with an
•
extension cord.
Never unplug the appliance from the power socket
•
by pulling on the power cord.
Always unplug the appliance when not in use.
•
The power cord must not come into contact with
•
the hot surfaces of the appliance.
16
V.2.0
instructions for use
All manuals and user guides at all-guides.com
Never slide the power cord under a carpet or rug.
•
Keep it away from high traffic areas.
Never twist, knot or wrap the power cord around
•
the appliance as this may damage it.
Never store the appliance while it is still warm.
•
Never leave your appliance unattended during
•
operation.
Do not use this appliance outdoors or on damp
•
surfaces. Never allow liquid to enter the appliance.
To prevent electric shock, never immerse the cable,
•
plug or appliance in water or any other liquid (bath,
shower, swimming pool).
Never touch the appliance with wet hands.
•
WARNING: The heater should not be used if the
•
glass panels are damaged.
WARNING: If the convector is installed in a fixed
•
position, do not use adhesives as adhesives are not
considered reliable fasteners.
Please refer to the end of these instructions for further
•
information on cleaning and maintaining the appliance.
Thermal safety: In the event of overheating, a safety
•
device automatically switches off the appliance.
In this case, unplug the appliance from the power
socket and plug it in once it has cooled down. If your
appliance still does not work, take it to your retailer's
customer service department to be inspected and
repaired. The user may not perform any repairs.
17
V.2.0
instructions for use