essentiel b ECHC 2001T Notice D'utilisation page 11

Model 783849_CONVECTEUR MOBILE ECHC 2001T
reference: 8006640_CONVECTEUR MOBILE ECHC 2001Tn
Feature Symbol Value
Contact Sourcing & Creation, Avenue de la Motte 59810 Lesquin - FRANCE
details:
Technical features
Mobile convector heater
•
Voltage: 230 V ~ 50 Hz
•
Power mode I: 800 W
•
Power mode II: 2000 W
•
Class I
•
assembly
Mounting the feet
!
Warning: To install the appliance, it must be unplugged from the power socket.
Keep all plastic bags away from children or animals.
Remove the appliance and spare parts from the packaging.
1.
Before using your radiator for the first time, it is imperative to assemble the two feet
2.
supplied.
20
V.2.0
assembly
All manuals and user guides at all-guides.com
Unit Feature
Other control options (select one or
more options)
Room temperature control
with presence detector
Room temperature control
with open window detector
Remote control option
Adaptive activation control
Limitation of activation time
Black globe sensor
Put the heater down on a flat, horizontal surface.
3.
Mount the feet onto the base of the heater by inserting the male guides into the female
4.
guides. Take care to comply with the direction of installation.
Unit
Secure the feet with the screws provided.
5.
Once the feet have been properly assembled, your appliance is stable and ready for use.
6.
no
You should never use your convector if the feet have not been assembled first.
•
Always unplug the appliance from the power socket after use.
•
no
use
no
no
First use
no
no
Your appliance may give off a mild odour when switched on for the first time. This is normal;
adequate ventilation must therefore be provided. This odour will only be temporary and will
dissipate quickly.
Power levels
Power levels are identified by the "I" and "II" symbols.
For a power of 800W, set the selector switch to "I".
•
For a power of 2000W, set the selector switch to "II".
•
To stop the heater, set the selector switch to "0".
•
Use
The thermostat control and power selection switches must be in position "0".
•
Plug the heater into the power socket after fully unwinding the power cord.
•
Switch on the radiator by setting the power selector switch to position I (800 W) or position
•
II (1200 W).
The power selector switches light up when the radiator is running.
•
To switch off the appliance, return both switches to their initial position: "0" and "MIN.",
•
then disconnect it.
Setting the thermostat
The temperature can be adjusted by means of the thermostat.
•
Turn the thermostat thumbwheel to the maximum temperature.
•
Once the desired temperature has been reached, slowly turn the knob anticlockwise until
•
the heater switches off (you will hear a "click").
The temperature will remain constant, regulated by the thermostat.
•
21
V.2.0
use