Getting Started; Main Unit Installation; Name Tags; Remote Sensor Installation - Oregon Scientific RAR500N Manuel De L'utilisateur

A complete set of 3 sensors are provided in this package,
while replacement wireless remote sensors can be
purchased separately.
Optional wireless remote sensors such as those
listed below can be purchased separately. For more
information, please contact your local retailer.*
-THGR122N / THGN122N
- THGN132N
* Features and accessories will not be available in all
countries.

GETTING STARTEd

MAIN UNIT INSTALLATION

1. Remove the battery compartment.
2. Insert the batteries, matching the polarities.
3. Press RESET after each battery change.
The battery icon may appear in the following
areas:
AREA
Main unit
Main unit batteries low
environment area
Remote sensor Remote sensor batteries
environment area low
All manuals and user guides at all-guides.com
MEANING
4
NOTE
• We recommend that you use alkaline batteries with
this product for longer usage and lithium batteries in
temperatures below freezing.
• Batteries should not be exposed to excessive heat
such as sunshine or fire.

NAME TAGS

Name tags can be inserted into the screen of the main
unit.
There are 5 name tags provided in this package:
1 x GARDEN + 1 x JARDIN + 1 x TUIN
1 x BEDROOM +1 x KAMER + 1 x CHAMBRE
1 x LIVING + 2 x SALON
2 x blank name tags

REMOTE SENSOR INSTALLATION

1. Using a Philips screwdriver, open the battery
compartment cover.
2. Slide channel switch to select channel 1. Ensure
you use a different channel for each sensor (2, 3).
3. Insert the batteries, matching the polarities.
4. Press RESET after each battery change.
5. Replace the battery compartment cover.