Briteq BEAMMATRIX5x5-RGBW Mode D'emploi page 10

ENGLISH
EFFECT MODE
Used to set the desired effect mode while used as master.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to selected the desired mode: 01. to 13.XXXXX: (different chases, including
color fade, color change, effects, ...)
 Once the correct option shows on the display, press the ENTER button to save it.
 Use DOWN and UP buttons to select the desired playback speed from 01 (very slow) to 99 (fast).
 Once the correct value shows on the display, press the ENTER button to save it.
 Use DOWN and UP buttons to select the desired strobe speed from 00 (NO strobe) to 99 (fast).
 Once the correct value shows on the display, press the ENTER button to save it.
FLOW INVERT MODE
Used to change the running direction of the chases.
 Press the MODE button until "FLOW INVERT" is shown on the display.
 Use DOWN and UP buttons to toggle between ON and OFF.
STATIC COLOR MODE
Used to set the desired fixed color while used as master: 9 preset colors + 1 custom color.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to selected the desired color:
 COLOR WW
 COLOR CW
 RED
 ORANGE
 YELLOW
 GREEN
 CYAN
 BLUE
 PURPLE
 COLOR SET
 Press the ENTER button: the display shows the value (000-255) for RED. (change with ± buttons)
 Press the ENTER button: the display shows the value (000-255) for GREEN. (change with ± buttons)
 Press the ENTER button: the display shows the value (000-255) for BLUE. (change with ± buttons)
 Repeat these steps until you have the desired values. The settings will be automatically saved.
MASTER DIM
Used to set the master dimmer while used as master.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the values can be changed
 Use DOWN and UP buttons to select the desired level for the master dimmer. (please note that the last
selected static color will be used to set the value)
 Once you have the desired level, press the ENTER button to save it.
Note: the setting of this option has NO effect while the projector is used as SLAVE or in DMX-mode.
WHITE BALANCE
Used to set the white balance or to perfectly match the colors of several projectors.
 Press the MODE button until the desired function is showing on the display.
 Press the ENTER button: the display shows the selected pixel 001 to 025. (change with ± buttons)
 Press the ENTER button: the display shows the value (050-255) for RED. (change with ± buttons)
 Press the ENTER button: the display shows the value (050-255) for GREEN. (change with ± buttons)
 Press the ENTER button: the display shows the value (050-255) for BLUE. (change with ± buttons)
 Repeat these steps until you have the desired values. The settings will be automatically saved.
Note: the setting of this option affects all color settings, static colors and DMX-controlled colors.
BRITEQ
®
warm white 3200K
warm white 5600K
this is a color that can be set by the user. Follow these steps:
8/109
OPERATION MANUAL
BEAMMATRIX5x5-RGBW