Basic Operations - Jackery Explorer 2000 Pro Manuel D'utilisation

Battery Power Indicator ( ) :
When the product is being charged, the orange circle around the battery percentage will light up in
sequence. When charging other devices, the orange circle will stay on.
Low Battery Indicator ( ) :
When the battery is less than 20%, the Low Battery Indicator will stay on. When less than 5%, the Low
Battery Indicator will flash. When it is being charged, the Indicator will be off.
Low Power Mode ( ) :
To avoid forgetting to turn off the output during use that results in battery consumption, the product turns
the Low Power Mode off by default. This occurs when no device is connected or the connected device is
less than or equal to a certain value. (Refer to the table below for more details), the device will
automatically shut down after 12 hours.
Output Output Power
≤25W
AC Output
≤2W
USB Output
Car Output ≤2W
To turn on the Low Power Mode:
Long press the AC Button and DISPLAY Button until the Low
Power Mode icon lights up. In Low Power Mode, please remember to turn off the output to avoid battery
consumption.
To turn off the Low Power Mode:
Long press the AC Button and DISPLAY Button until the Low
Power Mode icon disappears on the screen.
Error Code ( ) :
If the codes F0 to F9 appear on the screen, please refer to the troubleshooting guide or contact our
customer service for help.
Defaults
The device will automatically
shut down after 12 hours
The device will automatically
shut down after 12 hours
The device will automatically
shut down after 12 hours
5
EN EN

Basic Operations

Power On/Off
AC Output On/Off: Press the AC Button, the AC Output operation indicator lights up. Then you can
connect the equipment that needs AC charging. Press the AC Button again to turn off the AC Output.
USB Output On/Off: Press the USB Button, the USB Output operation indicator lights up. Then USB-A
and USB-C Output Ports can be connected to external load devices. Press the USB Button again to turn
off the USB Output.
Car Port On/Off: Press the Car Port Button, the Car Port operation indicator lights up. Then the Car Port
can be connected to the external load devices. Press the Car Port Button again to turn off the output.
LCD Screen On/Off
To Turn On, press the DISPLAY Button, any Output Power Button, or LED Light Button. Or, when there's a
charging input, the screen display will light up automatically.
To Turn Off, press the DISPLAY Button again and the screen display will turn off. Or, if there is no operation
in 30 seconds, the product will enter a sleep state and the screen display will automatically turn off.
To get the screen always-on (under charging or discharging state), follow these steps: After the
display screen lights up, double-click the DISPLAY Button and the mode of Always-On Display will be on.
To turn off Always-On Display, follow these steps: Press the DISPLAY Button and the screen will be
turned off in 30 seconds.
Tip:
During Always-On mode, the screen automatically turns off after 2 hours without charging or discharging.
Car Port Button
AC Button
USB Button
6