Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Vl.O
23 Gauge Pin Nailer
8561193
1.
Do not operate any tool when tired or under the
influence of drugs, alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become
entangled with the moving parts of a tool. Keep
long hair covered or bound.
3.
Do not overreach when operating the tool. Proper
footing and balance enables better control in
unexpected situations.
4.
Support the workpiece or clamp it to a stable
platform. Holding the workpiece by hand or against
your body may lead to personal injury.
SPECIFIC SAFETY PRECAUTIONS
1.
Do not nail on top of another nail. This is able to
cause the nail to be deflected and hit someone, or
cause the tool to react and result in a risk of injury
to persons.
2.
Remove finger from the trigger when not driving
fasteners. Never carry the tool with finger on
trigger, the tool is able to fire a fastener.
3.
Always wear eye protection. Operator and others in
the work area should always wear ANSI-approved
safety goggles with side shields. Eye protection is
used to guard against flying fasteners and debris,
which may cause severe eye injury.
4.
Always wear hearing protection when using the
tool. Prolonged exposure to high intensity noise
may cause hearing loss.
5.
Use safety equipment. A dust mask, non-skid safety
shoes and a hard hat must be used for the
applicable conditions. Wear a full face shield if you
are producing metal filings or wood chips.
Visit www.princessauto.com for more information
5
Publicité
Table des Matières
