Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Vl.O
23 Gauge Pin Nailer
8561193
4.
Always disconnect air resource:
a.
Before unloading or making adjustments.
b.
When maintaining the tool.
c.
When clearing a jam.
d.
When touching the safety yoke.
e.
When tool is not in use.
f.
When moving to a different work area.
Such precautionary measures reduce the risk of injury
to persons.
LOADING TOOL
1.
Do not load the tool with fasteners when any one of
the operating controls is activated.
2.
Never place a hand or any part of body in fastener
discharge area of tool.
3.
Never point tool at anyone.
WARNING: The warnings and precautions discussed
above cannot cover all possible conditions and
situations that may occur. It must be understood by the
user that common sense and caution are factors which
cannot be built into this product, but must be supplied
by the user.
USING BELT HOOK
The tool is packed with a separate hook system.
Assemble the hook on the tool before using the hook. The
hook can be positioned on both left and right sides.
1.
Loosen and remove the hook screw and nut(A).
Save the screw and nut for future use.
2.
Position the hook in your preferred position. Using
the longer screw packed with hook, fasten hook
to tool.
Visit www.princessauto.com for more information
15
Publicité
Table des Matières
