Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
23 Gauge Pin Nailer
8561193
WARNING: Do not at any time let brake fluids, gasoline,
petroleum-based products, penetration oils, etc., come
in contact with plastic parts. Chemicals can damage,
weaken or destroy plastic which may result in serious
personal injury.
COLD WEATHER OPERATION
For cold weather operation, near and below freezing, the
moisture in the air line may freeze and prevent tool
operation. We recommend the use of air tool lubricant or
permanent antifreeze (ethylene glycol) as a cold
weather lubricant.
CAUTION: Do not store tools in a cold weather
environment to prevent frost or ice formation on the
tool's operating valves and mechanisms that could
cause tool failure.
RECOMMENDED HOOKUP
1.
The air compressor must be able to maintain a
minimum of 60 psi when the tool is being used. An
inadequate air supply can cause a loss of power and
inconsistent driving.
2.
An oiler can be used to provide oil circulation
through the tool. A filter can be used to remove
liquid and solid impurities which can rust or gum up
internal parts of the tool.
3.
Always use air supply hoses with a minimum
working pressure rating equal to or greater than the
pressure from the power source if a regulator fails,
or 150 psi, whichever is greater. Use 3/8 in. air hose
for runs up to 50 feet and use 3/8 in. quick coupler
on the air hose.
Visit www.princessauto.com for more information
23
Publicité
Table des Matières
