Using The Dvd Player - Akai ATE-24014CNK Manuel D'utilisation

DVD PLAYER OPERATION

Using the DVD Player

Play Disc
1. Press SOURCE to select DVD mode then insert DVD disc make sure that the label (printed
side) is facing you.
2. The Disc will be played automatically.
If it is a DVD disc, it will show the Menu/Title Page on the screen.
If it is a CD, it will play the first track directly.
3. Press the STOP Button, if you want to stop the Disc playback. You can continue playback by
pressing the PLAY/PAUSE or the OK button (on the remote control and it will resume at the
location where the disc stopped (Resume Play).
4. Press the STOP Button twice to stop playback definitively.
Pause Mode
This function is applicable for both DVD and CD audio.
For DVD, the picture is frozen.
For CD audio, it will pause the playback.
1. Press the PLAY/PAUSE Button to enter in mode Pause.
2. Press the PLAY/PAUSE to resume Playback.
DVD Menu Play
This function is only applicable for DVD.
You can get the casting information, Production History, Movie introduction etc. directly through
this function.
1. Press the DVD SET UP button on the remote controller to enter the DVD Root Menu.
2. Use the Navigation Arrows
the index to do the selection.
3. Press OK button to confirm the Select with Number Button (0-9)
Select with Number Buttons (0-9)
When using the Number Buttons as input, user can directly input the numbers, if want to enter
two digits. For example, to input the number '13', user has to first press "-/--" then press '1' and
then press '3'.
During a DVD movie playback,input through the Number Buttons to select the Chapter in
the current title.
When playing audio CD,press Number key to access the desired track .
All manuals and user guides at all-guides.com
/ / / or input the corresponding number (0-9) of the item in
149