Connect The Lcd Monitor To Macintosh - NEC LCD3000 Manuel Utilisateur

Connecting to a Macintosh
Connecting your Macintosh
video cards or drivers may not display images correctly.

Connect the LCD Monitor to Macintosh

• To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal
cable (mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use the signal cable available separately
(mini D-sub 15 pin to BNC x 5).
• If you use with a Macintosh PowerBook, set "Mirroring" to Off.
Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any
special identification or configuring your monitor's image and monitor may require.
• The AUDIO IN 1 can be used for audio input. For connection, select AUDIO 1 from the AUDIO INPUT button.
LCD monitor
LCD monitor (second monitor)
01_English 11
All manuals and user guides at all-guides.com
®
Computer
® computer to your LCD monitor will enable you to display your computer's screen image. Some
®
To RGB 3 DVD/HD IN
BNC x 5
English-11
To audio output
To analog RGB output
Mini D-sub 15 pin
BNC x 5
Macintosh
BNC x 5
15/10/02, 12:07 pm