All manuals and user guides at all-guides.com
Important!
The vibration value changes according to the area of application of
the electric equipment and may exceed the specifi ed value in ex-
ceptional circumstances.
Keep the noise emissions and vibrations to a minimum.
•
Only use appliances which are in perfect working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in accordance with in-
structions, certain residual risks cannot be rules out. The fol-
lowing hazards may arise in connection with the equipment's
construction and layout:
1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is
used over a prolonged period or is not properly guided and main-
tained.
5. Before starting the equipment
5.1 Assembly (Fig. 3-6b)
Connect the upper part of the housing and the bottom part of the
housing together (Fig. 3).
Slot the guide wheel (Fig. 4/Item 7 into the guide on the housing (Fig.
4/Item A). Make sure that there is an audible click when they engage.
Anl_PE_AFR_18_Li_SPK7.indb 229
Anl_PE_AFR_18_Li_SPK7.indb 229
- 229 -
GB
13.10.2016 15:23:55
13.10.2016 15:23:55