When The Work Is Done; Emptying The Dust Container - Bosch GL-40 Notice D'utilisation

en
14*
Figure
Secure the drill dust nozzle to the handle and then place
against the wall, so that the nozzle drill hole opening sits
directly over the hole to be drilled.
Select the lowest power setting and then switch on the
vacuum cleaner.
Suction holds the drill dust nozzle in the required posi-
tion.
Depending on the surface of the wall to be drilled it may
be necessary to readjust the power to a higher setting to
ensure the drill dust nozzle is firmly attached.
Any fine particles are automatically vacuumed up.
Caution: the drill dust nozzle should only be used in
!
conjunction with the dust container since fine drill
dust can impair the function of the dust bag.
Hard-floor brush
15*
Figure
Cleaning the hard-floor brush
16*
Figure
a)
b)
c)
d)
e)
f)
17
Figure
18
Figure
All manuals and user guides at all-guides.com

When the work is done

Figure
Figure
Using the dust container
Figure
Figure

Emptying the dust container

Figure
19
20
21
22
23