emerio HB-111411.1 Mode D'emploi page 5

HB-111411.1
STICK MIXER ATTACHMENT
1. Don't touch the sharp blades.
2. Remove the blades before emptying the bowl.
3. Never remove the cover until the blade has completely stopped.
IMPORTANT
1. With heavy mixtures, do not use your stick mixer for longer than 50 seconds and please let the appliance
rest for at least 4 minutes after continuous use of 50 seconds, otherwise it will overheat.
2. Disconnect the appliance from power supply before changing accessories or approaching parts that move
in use.
3. Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
4. Only use your stick mixer set for its intended domestic use.
BEFORE USING FOR THE FIRST TIME
1. Remove all packaging.
2. Wash the parts: see "CLEANING".
KNOW YOUR HAND BLENDER
1. Speed buttons
2. Power handle
3. Blender shaft(removable)
4. Chopper cover
5. Chopper blade
6. Egg whisk (removable)
7. Holder for accessories
FOR SAUCEPAN BLENDING
Take the pan off the heat and let it cool slightly. Otherwise your stick mixer could overheat.
1. Fit the power handle inside the blender shaft, turn and lock.
2. Plug in. To avoid splashing, place the blade in the food before switching on.
3. Hold the container steady. Then press either speed button (use speed "I" for slower blending to reduce
splashing).
4. Don't let liquid get above the join between the power handle and blender shaft.
5. If your stick mixer gets blocked, unplug before cleaning.
6. After use, unplug and dismantle.
TO USE THE CHOPPER
You can chop meat, cheese, vegetables, herbs, bread, biscuits and nuts.
Don't chop hard foods such as coffee beans, ice cubes, spices or chocolate, otherwise you will damage the blade.
1. Remove any bones and cut food into 1-2cm cubes.
2. Fit the chopper blade over the pin in the bowl.
3. Add your food.
4. Fit the chopper cover, turn and lock.
5. Fit the power handle, turn and lock.
6. Plug in. Hold the bowl steady. Then press speed "II".
- 4 -
EN