Pelgrim GVW340LS Notice D'utilisation page 87

4. To install the spray arm back, press
the spray arm upwards and
simultaneously turn it counterclockwise
until it locks into place.
Cleaning the ceiling spray arm
We recommend to clean the ceiling spray
arm regularly to prevent soil from clogging
the holes. Clogged holes can cause
unsatisfactory washing results.
The ceiling spray arm is placed on the
ceiling of the appliance. The spray arm (C)
is installed in the delivery tube (A) with the
mounting element (B).
1. Remove the stoppers from the sliding
rails of the cutlery drawer and pull the
drawer out.
2. Move the upper basket to the lowest
level to reach the spray arm more
easily.
3. To detach the spray arm (C) from the
delivery tube (A), turn the mounting
element (B) counterclockwise and pull
the spray arm downwards.
4. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water through
the holes to wash soil particles away
from the inside.
5. To install the spray arm (C) back,
C
insert the mounting element (B) in the
spray arm and fix it in the delivery tube
B (A) by turning it clockwise. Make sure
that the mounting element locks into
place.
A
6. Install the cutlery drawer on the sliding
rails and insert the stoppers.
1
2
23