Wiring Diagram - MaxLite WallMax WP-ADS Serie Mode D'emploi

Operating Instructions
MaxLite WallMax™ Thin Cutoff Wall Pack
®

Wiring Diagram

Black White Green
(L) (N) (G)
Driver
Neutral
1. The Red wire (Photocell) connects to Black wire (Driver AC)
2. The White wire (Photocell) connects to White wire (Driver AC) and White N (Main Power)
3. The Black wire (Photocell) connects to Black L (Main Power)
4. Green wire (Driver AC) connects to Green G (Main Power)
PIR Occupancy Sensor Wiring Diagram
Non-Dimming
Load
Note: For additional information on the occupancy sensor see:
https://www.maxlite.com/products/analog-sensors-stand-alone
© Copyright 2021. MaxLite, Inc. All Rights Reserved.
12 York Ave, West Caldwell, NJ 07006 Tel: 800-555-5629 Fax: 973-244-7333 Email: info@maxlite.com
Black
White Red
Green
White
AC
Black
Load
(Red)
Violet
Pink
Black
Photocell
Dim (+)
Violet
Dim (-)
Pink
WP-ADS Series
Dimming
Load
Load
(Red)
Black
Page: 2
REV: 11/18/21