Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(4)
ID numbers Programming
• On the RMD 03, go to «Comm/Prog» mode.
The following message is displayed on the LCD screen:
The following text is displayed on the PC.
• To enter a new beacon:
- select an empty place and enter the corresponding number;
- enter the ID number of the beacon;
- enter the corresponding key.
If the key is correct, the beacon will be shown in the list.
• To delete an existing beacon:
- select the line of the beacon to be deleted;
- type «erase» in place of the ID number.
The beacon which has been deleted will no longer be shown in the list.
(5)
Exit of programming mode
• Press the pushbutton of RMD 03.
(6)
Configuration required to operate in GPS decoding
• Program the internal clock of RMD in universal time (UT).
«SYST/CLOCK» mode
• Program the decoding of GPS sensors.
«SYST/DECOD» mode.
DOC05198A
DATA INPUT WITH
PC/TERMINAL
Id number for ARGOS GPS beacon
01: 22331
11: ----
02: ----
12: ----
03: ----
13: ----
04: ----
14: 08682
05: ----
15: 22332
06: ----
16: 09735
07: ----
17: ----
08: ----
18: ----
09: ----
19: ----
10: ----
20: 08570
Select the number of the line to modify
Type the beacon Id (or erase)
Type the associate key
ARGOS RECEIVER RMD 03
:----------
---------:-- -------
USER MANUAL
PAGE : 26
Publicité
Table des Matières
