Installation Steps; Package Contents - Axis Communications P3301 Guide D'installation

AXIS P3301/P3304 Installation Guide
AXIS P3301/P3304 Installation Guide
This installation guide provides instructions for installing the AXIS P3301/AXIS P3301-V/AXIS
P3304/AXIS P3304-V Fixed Dome Network Camera on your network. These cameras will be jointly
referred to as AXIS P3301/P3304. The information in this manual applies to all the cameras unless
specified otherwise. For all other aspects of using the product, please see the User's Manual,
available on the CD included in this package, or from www.axis.com/techsup

Installation steps

1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 5.
4. Assign an IP address. See page 6.
5. Set the password. See page 9.
6. Adjust the focus. See page 11.
7. Complete the installation. See page 11.

Package contents

Item
Fixed Dome Network camera
Terminal block connector
Mounting kit
CD
Printed Materials
Models/variants/notes
AXIS P3301 - Tamper-resistant casing
AXIS P3301-V - Vandal-resistant casing
AXIS P3304 - Tamper-resistant casing
AXIS P3304-V - Vandal-resistant casing
4-pin connector block for connecting external devices to the I/O terminal
connector
Screwdriver for tamper-proof screws
Tamper-proof screws
Drill template
AXIS Network Video Product CD, including product documentation,
installation tools and other software
AXIS P3301/P3304 Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.
Page 3