Installing The Tubular Guide Elbow (Auxiliary Equipment) - Hauff-Technik MIS 60S Instructions D'installation

MIS 60S
Remove the outer ring of the wall collar WAR 60 at the
13
perforations (see fi g.: 20).
Legend for fi g.: 20
1 Outer ring of the wall collar WAR 60
2 Perforation
3 Inner ring of the wall collar WAR 60
Place the inner ring of the wall collar over the cable/mi-
14
cropipe and over the building entry pipe and push it into
the drilled hole (see fi g.: 21).

13 Installing the tubular guide elbow (auxiliary equipment)

The tubular guide elbow can be used only for
micropipes/cables up to Ø 16 mm.
(Article number of tubular guide elbow MIS 60-RB
including
adapter (packing unit contains 10): 2900100810)
Insert the adapter for the tubular guide elbow into the
1
wall entry pipe on the inside of the building so that it is
fl ush with pipe (see fi g.: 22).
32
Art. Nr.: 5090032027 Rev.: 00/2018-08-01
2
3
EN
1
Fig.: 20
Fig.: 21
Fig.: 22