Decommissioning And Recycling; Safety - probst SPEEDY VS-140/200 Instructions D'emploi

10 Decommissioning and recycling

10.1 Safety

The lifting device may only be decommissioned and prepared for disposal by qualified specialists.
10.2 Decommissioning the Lifting Device
1. Set the main switch to 0.
2. Park the lifting device securely.
3. If the lifting device is defective, clearly indicate this on the device.
4. Remove the suction plate.
5. If necessary, place a protection cover over the suction plate.
6. Store the lifting device so that it cannot be damaged and protect against unauthorized use.
10.3 Disposing of the Lifting Device
1. Decommission the lifting device.
2. Detach and dispose of the suction plate.
3. Detach and dispose of the vacuum generator.
4. Detach and dispose of the main body.
For proper disposal, please contact a company specializing in the disposal of technical goods and instruct the
company to observe the applicable disposal and environmental regulations. Probst is happy to assist you in
finding a suitable company.
52700015 / 52700016 / 52700017 / 52700018 / 52700019 / 52700020
Decommissioning and recycling
39 / 41