Transport And Storage; Care And Service - Kärcher BLV 36-240 Battery Manuel D'instructions Original

WARNING
Risk of injury due to loss of control
Always hold the device with both hands on the provided
handles.
1. Insert the battery pack, see chapter Inserting the
battery pack.
2. Start the device.
Illustration P
a Set the selector lever to blower mode.
b Press the trigger.
The device starts up.
c Use the speed regulation to adjust the amount of
airflow.
Remove the collecting bag
WARNING
Movement of the fan wheels and mulching blades
Incision injuries
Wear protective gloves.
Keep your fingers away from the fan and mulching
blades.
1. Switch off the device.
2. Remove the battery pack, see chapter Removing
the battery pack.
3. Remove the collecting bag.
Illustration Q
a Take the tab of the collecting bag off the eyelet.
b Push the adapter down.
c Pull the collecting bag off the connecting piece.
Emptying the collecting bag
WARNING
Movement of the fan wheels and mulching blades
Incision injuries
Wear protective gloves.
Keep your fingers away from the fan and mulching
blades.
1. Switch off the device.
2. Remove the battery pack, see chapter Removing
the battery pack.
3. Remove the collecting bag, see chapter Remove
the collecting bag.
4. Open the zipper on the collecting bag and empty the
contents.
Illustration R
Removing the battery pack
Note
During longer work breaks, remove the battery pack
from the device and secure it against unauthorised use.
1. Pull the battery pack unlocking button in the direc-
tion of the battery pack.
Illustration S
2. Press the battery pack unlocking button to unlock
the battery pack.
3. Remove the battery pack from the device.
Finishing operation
1. Remove the battery pack from the device (see
Chapter Removing the battery pack).
2. Clean the device (see Chapter Cleaning the de-
vice).

Transport and storage

1. Switch off the device.
2. Remove the battery pack, see Chapter Removing
the battery pack.
18
3. Remove the collecting bag, see chapter Remove
the collecting bag.
4. Remove the suction pipe.
Illustration T
a Open the latch for the protective grid.
b Unlock the suction pipe with the slider.
c Pull out the motor casing locking pin as far as
possible.
WARNING
Movement of the fan wheels and mulching blades
Incision injuries
Wear protective gloves.
Keep your fingers away from the fan and mulching
blades.
d Take the suction pipe off the motor casing.
5. Remove the blower pipe.
Illustration U
a Press the blower pipe unlocking button.
b Take the blower pipe off the motor casing.

Care and service

Cleaning the device
WARNING
Uncontrolled startup
Risk of injury
Remove the battery pack from the device during work
breaks and before carrying out any service or care work.
ATTENTION
Incorrect cleaning
Damage to the device
Clean the device with a damp cloth.
Do not use solvent-based cleaning agents.
Do not immerse the device in water.
Do not clean the device with a hose or high-pressure
water jet.
1. Switch off the device.
2. Remove the battery pack (see chapter Removing
the battery pack).
3. Clean the exterior of the device with a soft, dry cloth
or with a brush.
Illustration V
Removing blockage
Note
Do not try to remove the fan or mulching blades. If re-
moval of the mulching blades or fan is required, contact
an authorised Customer Service centre.
WARNING
Movement of the fan wheels and mulching blades
Incision injuries
Wear protective gloves.
Keep your fingers away from the fan and mulching
blades.
1. Switch off the device.
2. Remove the battery pack, see Chapter Removing
the battery pack.
3. Remove the collecting bag, see chapter Remove
the collecting bag.
4. Remove the suction pipe.
Illustration T
a Open the latch for the protective grid.
b Unlock the suction pipe with the slider.
c Pull out the motor casing locking pin as far as
possible.
English