GE TBX12SAXRWH Manuel Du Propriétaire Et Instructions D'installation page 12

REVERSING THE DOOR SWING
TRANSFER FREEZER DOOR
7
HANDLE TO THE RIGHT
Remove the nameplate plug button by carefully
prying under the edge with a putty knife. Remove
the exposed screw holding the handle.
Nameplate
Plug Button
Remove the two screws holding the handle to the
bottom of the door.
Remove the handle.
Reverse the buttons and screw on top flange of door.
Plug Button
12
Installation Instructions
Handle Top
Handle Bottom
Screws
for Handle
Holes
(CONT.)
TRANSFER FREEZER DOOR
7
HANDLE TO THE RIGHT (CONT.)
Transfer the button on door face to opposite side.
Plug Button
Attach the handle to the right side of the door,
reversing the above procedure.
INSTALL THE DOOR STOPS
8
Metal door stops, to be used when reversing the door
swing, were included with the refrigerator. Remove the
door stops from the right end of each door. Install the
door stops, designed for the left side, on the left end of
each door.
Shim
Door Stop
Left Side
Shim
Right Side