Displaying Room Temperature; Selecting The Language For Displaying Day Of The Week; Switching Between °C/°F; Activating Background Lighting/Projector - Conrad Electronic 67 16 50 Notice D'emploi

All manuals and user guides at all-guides.com
• The rocker button "+/-" (7) can be used to set the time. For quick adjustment, hold down the
rocker button a little longer.
• Save the setting by pressing the "MODE" (6) button again.
c) Displaying Room Temperature
Press and hold the "MODE" (6) button until the upper display shows the room temperature.
d) Selecting the Language for Displaying Day of the Week
The day of the week (Monday....Sunday) is shown abbreviated to two letters in the display. The
language for the abbreviations can be adjusted as follows:
• Press and hold the "-" rocker button (7). The following abbreviations for the following
languages will be shown in sequence on the right bottom of the display.
EN (English)
GE (German)
FR (French)
IT (Italian)
SP (Spanish)
• When the desired language is shown, release the "-" button, the setting is saved.
e) Switching between °C/°F
• Briefly and repeatedly press the "MODE" (6) button until the display shows the room
temperature.
• Briefly press the "WAVE °C/°F" button to select the desired temperature unit "°C" or "°F").
f) Activating Background Lighting/Projector
If the continuous lighting has not been activated using the "CONTINUE BRIGHT" (4) switch
(mains power supply required!), briefly pressing the "SNOOZE/LIGHT" (1) button will activate
lighting and projection for approx. 5 seconds.
39