Conrad Electronic 67 16 50 Notice D'emploi page 32

All manuals and user guides at all-guides.com
1 "LIGHT/SNOOZE" button
- to activate the projector and the background lighting of the LC display (for approx.
5 seconds)
- Snooze function for alarm
2 Opening for the projector lens
3 Rotary projector
4 Slide switch "CONTINUE BRIGHT" to activate continual display lighting and projection
(only when power is supplied by the plug-in power unit provided; not possible when only
using battery power)
5 Low-voltage socket for external power supply unit
6 "MODE" key
- Press the button for longer than 2 seconds: Starting the manual adjustment of the
time/date
- Confirms the entry of a manual setting
- Switches the display content (e.g. alarm setting/room temperature)
7 "+" and "-" rocker buttons
- Changes a value during manual setting
- Press and hold the "-" button to select the language of the day of the week to be
displayed
- Briefly press of the "+" button to switch between 12 and 24 hour displays:
- Press and hold the button "+" button to set the time zone
8 Use the "ALARM ON/OFF" to switch the alarm on or off and to stop the alarm sound.
9 "WAVE °C/°F" button
- Press the button for a long time to restart radio signal reception
- Press the button briefly to switch between °C and °F
10 "COLOR LOCK" button for setting the colour of the background lighting of the display and
projection (not possible during DCF reception)
11 "ROTATE" rotary control for rotating the projector
12 "FLIP" button to mirror the projection by 180°
13 "FOCUS" rotary control for focussing the projector
14 Battery compartment
32