Special Functions; Time In A Second Time Zone; Setting The Time Zone - Conrad Electronic 67 16 50 Notice D'emploi

All manuals and user guides at all-guides.com

13. Special Functions

a) Time in a Second Time Zone
You can set any given time in this feature, perhaps to display the time in your most recent
holiday destination or something similar.
Displaying the Time in a Second Time Zone
• Press and hold the "MODE" (6) button until the upper display shows "Dual Time" and the time
appears.
Setting the Clock to the Time in a Second Time Zone
• If the time in a second time zone is shown in the display ("Dual Time" in the top of the display),
hold the "MODE" (6) button e "MODE" button (6) down long enough (approx. 3 seconds) for
the hours of the second time zone to start to flash in the upper part of the display.
• The rocker button "+/-" (7) can be used to set the time. For quick adjustment, hold down the
rocker button a little longer.
• Briefly press the "MODE" (6) button, the minutes flash.
• The rocker button "+/-" (7) can be used to set the time. For quick adjustment, hold down the
rocker button a little longer.
• Briefly press the "MODE" (6) button, the setting is saved.
b) Setting the Time Zone
The hours of the time display can be adjusted by up to +12 or -12 hours depending on the time
zone, in order to comply with the exact DCF time of the respective time zone.
Activating the Time Zone
• Hold down the "+" rocker button (7) for about 3 seconds until the symbol "F" appears in the
display on the right next to the minute display (Time Zone Mode activated) or the symbol
disappears (Time Zone Mode deactivated).
Setting the Time Zone (+12h.....-12h)
• Briefly and repeatedly press the "MODE" (6) button until either the room temperature shows
or the "Dual Time" is displayed.
• Hold the "MODE" button (6) down long enough (approx. 3 seconds) until the hours of the time
display start to flash in the middle of the display.
38