Mounting On A Wall - LG 27LQ625S Guide De Configuration Rapide

Masquer les pouces Voir aussi pour 27LQ625S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MOUNTING ON A WALL

An optional wall mount can be used with your LG Television. Consult
with your local dealer for a wall mount that supports the VESA
standard used by your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount bracket on a solid
wall perpendicular to the floor. If you are attaching the TV to other
building materials, please contact qualified personnel to install the
wall mount. Detailed instructions will be included with the wall
mount. We recommend that you use an LG brand wall mount. The LG
wall mount is easy to adjust or to connect the cables. When you do
not use LG's wall mount bracket, use a wall mount bracket where the
device is adequately secured to the wall with enough space to allow
connectivity to external devices. If you are using a non-adjustable
mount, attach the mount to the wall. Attach the cables to the TV first,
then attach the TV to the mount.
100 mm (3.9 inches)
100 mm
100 mm
Make sure to use screws and wall mounts that meet the VESA
standard. Standard dimensions for the wall mount kits are described
in the following table.
Model
Wall mount (A x B)
A
B
Standard screw
Number of screws
Wall mount bracket (optional)
100 mm
100 mm
24LQ510S
27LQ615S
24LQ520S
27LQ625S
75 x 75 (mm)
2.9 x 2.9 (inches)
M4 x L10
4
LSW149
CAUTION
y Must use the enclosed screw in the box. (Depending upon model)
y Disconnect the power before moving or installing the TV.
Otherwise electric shock may occur.
y Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
y If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorized LG wall mount and
contact the local dealer or qualified personnel. When using a third-
party wall mount, it is not covered by the warranty.
y Do not overtighten the screws as this may cause damage to the TV
and void your warranty.
y Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
y Screw length from outer surface of back cover should be less than
8 mm (0.3 inches).
Wall mount Pad
Back Cover
Standard screw:
NOTE
y Use the screws that are listed on the VESA standard screw
specifications.
y The wall mount kit includes an installation manual and necessary
parts.
y The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
y The length of screws may differ depending upon the wall mount.
Make sure to use the proper length.
y For more information, refer to the manual supplied with the wall
mount.
Wall mount Pad
Back Cover
M4 x L10
Max.8 mm (0.3 inches)
11

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

24lq520s24lq510s27lq615s

Table des Matières