Upright AB38 Manuel Utilisateur page 13

M
AINTENANCE
W A R N I N G
!
Never perform service while the platform is elevated.
H
Y D R A U L I C
The hydraulic fluid reservoir is located in the chassis door.
NOTE: Never add fluid if the platform is elevated.
C H
HECK YDRAULIC
1. Make sure that the platform is fully lowered.
2. Open the chassis door.
3. Remove the filler cap from the hydraulic fluid reservoir.
4. Check the fluid level on the dipstick on the filler cap.
5. Add the appropriate fluid to bring the level to show on
the dipstick. See "Specifications" on page 14
Operation Manual
All manuals and user guides at all-guides.com
!
F
L U I D
F
LUID
Figure 5: Hydraulic Fluid Reservoir and Dipstick
Filler Cap
Maintenance
Page 9