3. Connect isolated, normally-open, dry contacts (rated to handle 60Vdc maximum,
30Vac RMS maximum, and 20mA maximum) across the EPO device to Pin 1 and Pin
2. Use non-shield wiring, size 18-22 AWG (0.75 mm2 – 0.3 mm2).
4. Reconnect the EPO connector to the EPO port.
5. Verify that the externally-connected EPO switch is not on to enable power to the UPS
output receptacles.
6. Plug in the UPS, then press power switch button
7. Activate the external EPO switch to test the EPO function
8. De-activate the external EPO switch and restart the UPS.
12. UPSurf Control
UPSsurf Control, the automatic shutdown software (included) allows the UPS to be
managed from a computer.
UPSsurf Control is a brand new UPS monitoring software, which provides a user-friendly
interface to monitor and control your UPS. This unique software provides safe auto
shutdown for multi-computer systems in the event of power failure. With this software, users
can monitor and control any UPS on the same LAN no matter how far away they are.
When installing all required files from the Internet, enter the serial No: 511C1-01220-0100-
478DF2A to install the software.
When your computer restarts, the UPSsurf Control software will appear as a green plug icon
located in the system tray, near the clock.
8 . A D D I T I O N A L B A T T E R Y I N S T A L L A T I O N S E T U P
The 750/1000 VA & 3000VA models feature internal batteries inside the UPS. The
1500/2000VA models have no internal battery and require an external battery pack.
The 1500/2000VA and 3000VA models include an external battery port to provide additional
battery runtime.
Caution: While adding a battery pack, connection of the battery cable to the
INFOSEC UPS SYSTEM - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr
Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr - 09 05 04 205 12
All manuals and user guides at all-guides.com
external battery port may cause sparks.
to turn on the UPS.
21