Adjustment; Technical Specification - Ingo Maurer Oskar Instructions

English
Caution: Never pull or lift the lamp by the moveable
metal arm! ①
Important: Do not connect the lamp to the power sup-
ply until the setup is completed.

Adjustment

Caution: The shade heats up quickly. Allow it to cool down
completely before touching it!
The direction of the light is adjusted via the flexible metal
arm as shown in fig. ②
Bend the arm into the required shape and position.
Important: Please ensure that the shade does not come
into direct contact with books, plastics or flammable materials.
Cleaning
The protective glass cover can be cleaned as required with an
ordinary household glass cleaner. Use a damp cloth for the alu-
minium parts.

Technical specification

100-240 V~, 50-60 Hz., PF 0.8, secondary 17V DC, 350 mA,
6 Watt LED, 700 lm, 2700 K,CRI>90.
integrated electronic transformer and toggle switch.
Cable length 400 cm.
Oskar LED is not dimmable.
Contains light sources of energy class F (A-G), which cannot
be exchanged by the user.
The light sources and the Power supply can be replaced by
Ingo Maurer GmbH, a by Ingo Maurer authorized service
technician or a similar qualified person.
According to the manufacturer, LEDs of this class have an
average life of at least 25 000 hours.
6
English
A defective lamp must be disposed as electronic
scrap, it must not get into domestic waste.
Any repairs that become necessary must be performed
by a qualified electrician. If the external power lead becomes
damaged, it may only be replaced by Ingo Maurer GmbH.
In case of damage caused by disregarding these operating
instructions, improper commissioning and/or construction
change, e.g. due to foreign components, handling
or external interference, the warranty claim is void.
7