Step 3 - Align Door; Step 4 - Level Refrigerator - Haier HRC3211AC Manuel D'installation Et D'utilisation

STEP 3 - ALIGN DOOR

(IF NECESSARY)
1. Using a flat-blade screwdriver, gently insert the blade under the top hinge cover
and pry up to remove.
2. Using a Phillips-head screwdriver, loosen the three top hinge screws.
3. Adjust the door or put a spacer between the hinge and cabinet, and then tighten
the screws.
4. Replace the top hinge cover by aligning the back of the cover with the back of the
hinge. Press down firmly on the front of the hinge cover until it snaps in place.

STEP 4 - LEVEL REFRIGERATOR

Your refrigerator has two leveling legs located in the front, bottom corners. After
placing the refrigerator in its final position, level the refrigerator.
NOTE: The refrigerator door will close easier when the front of the refrigerator is
raised slightly.
Adjust the Leveling Legs:
To Raise Refrigerator – Turn the leveling legs to the left.
To Lower Refrigerator – Turn the leveling legs to the right.
12