Step 2 - Level Refrigerator; Step 3 - Align Door (If Necessary) - Haier HRC3251AC Manuel D'installation Et D'utilisation

STEP 2 - LEVEL REFRIGERATOR

Your refrigerator has two leveling legs located in the front, bottom corners. After
placing the refrigerator in its final position, level the refrigerator.
Adjust the Leveling Legs:
To Raise – Turn the leveling legs to the left.
To Lower – Turn the leveling legs to the right.
NOTE: The refrigerator door will close easier when leveling legs are extended.

STEP 3 - ALIGN DOOR (IF NECESSARY)

1. Remove the top hinge cover. Using a flat-blade screwdriver, place the blade
under the front edge of the cover and gently lift up.
2. Using a Phillips screwdriver, loosen the top hinge screws.
3. Adjust the door and then tighten the screws.
4. Replace the top hinge cover by aligning the rear of the cover with the rear of the
hinge. Press firmly on the front of the cover until it snaps in place.
9