Step 2 - Door Reversing - Haier HRC3211AC Manuel D'installation Et D'utilisation

STEP 2 - DOOR REVERSING

(OPTIONAL)
If you want the refrigerator door to open from the opposite side, you can reverse the
door swing.
a
a
b
c
1. Using a flat-blade screwdriver, gently insert the blade under the top hinge cover
and pry up to remove.
2. Using a Phillips-head screwdriver, remove the two screws and the hinge pin from
the top hinge.
b
3. Remove top hinge, and then lift the door off of the bottom hinge.
4. Remove the hole plugs from the cabinet top, move them to the opposite side,
and then insert the plugs into holes created by removing the hinge screws.
5. Remove any loose items in the refrigerator, and then gently lay the refrigerator
on its back.
6. Remove the two front leveling legs.
7. Using a Phillips-head screwdriver, remove the two screws attaching the hinge to
the bottom of the refrigerator cabinet, and then remove the hinge.
b
c
d
e
f
Hole Plugs
Cover
Top Hinge Screws
a
c
d
Top Hinge
e
Bottom Hinge
f
Bottom Hinge Screws
a
Top Hinge Screws
b
Top Hinge
c
Top Hinge Pin
9