Wine Cellar Installation; Install Limitations; Door Handle Installation; Dimensions - Haier Amana AWCE50ARS Guide De L'utilisateur

WINE CELLAR INSTALLATIONS

Install Limitations

• Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc. Your wine
cellar was not designed to operate in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cellar on a hard even surface away from direct sunlight or heat
source e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be correct-
ed with the leveling legs located on the front and rear bottom corners of the wine cellar.

Door Handle Installation

• Once you have unpacked your wine cellar you will have to install the grip handle on the door with the
supplied screws.

Dimensions

• Built-in wine cellars need to be ventilated from the front. This feature allows the unit to be built in an
enclosed area. The bottom front grille should be clear of all obstructions. This is absolutely necessary for
the air to circulate and for the unit to operate efficiently. The dimensions for installation are as follows. (W
x D x H)
Unit Dimensions: 23-7/8" x 23-3/4" x 34-11/16"
Built-In Dimensions: 24" x 24" x 35"
34-11/16"
23-3/4"
23-7/8"
English
8