Disposal Information; Before Using For The First Time - Bosch BSG7 Serie Notice D'utilisation

Masquer les pouces Voir aussi pour BSG7 Serie:
Table des Matières

Publicité

en

Disposal information

Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It
is made of environmentally friendly materials and can
be recycled.
Dispose of packaging that is no longer required at an
appropriate recycling point.
Used vacuum cleaners
Used vacuum cleaners still contain many valuable
materials. Therefore, please take your used vacuum
cleaner to your retailer or recycling centre to be
recycled. For current disposal methods, please
enquire at your retailer or your local council.
Disposal of filters and dust bags
Filters and dust bags are made from environmentally
friendly materials.
As long as they do not contain substances that are
not permitted to be disposed of in the household
rubbish, you can dispose of them with your normal
household rubbish.
!
Please note
The mains socket must be protected by at least a 16
amp fuse.
If a fuse should blow when you switch on the
appliance, this may be because other electrical
appliances which have a high current draw are
connected to the same power circuit.
To prevent the fuse from blowing, select the lowest
power setting before switching the appliance on, and
increase the power only once it
is running.
All manuals and user guides at all-guides.com
Fold out picture pages.

Before using for the first time

Figure
Setting up
Figure
a) Push the flexible hose adapter into the opening on the
b To remove the flexible hose, press the release button and
Figure
Figure
Figure
Figure
Figure
a) Press the ON/OFF button in the direction of the arrow to
b) The button can also be applied using the swing handle.
1*
Push the handle onto the flexible hose until it engages.
2
vacuum cleaner until it engages.
pull the hose out.
3
Connect the handle and the telescopic tube together.
4
Connect the floor tool and the telescopic tube together.
5
To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.
6
Take the mains plug, pull the mains cable to the required
length and insert the plug into a socket.
7
switch your vacuum cleaner on.
9

Publicité

Table des Matières
loading

Table des Matières