Bosch BSG7 Serie Notice D'utilisation page 15

Masquer les pouces Voir aussi pour BSG7 Serie:
Table des Matières

Publicité

en
Replacing the HEPA filter (motor protection filter)
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
20
Figure
Open the dust bag compartment lid.
Pull out the HEPA filter in the direction of the arrow and
remove it from the appliance.
Insert the new HEPA filter and close the dust bag
compartment lid.
Replacing the exhaust filter
You must replace the exhaust filter in your vacuum cleaner
once a year.
Replacing the HEPA filter
21*
Figure
Open the dust bag compartment lid (see Figure 18).
Release the HEPA filter by pressing the locking tab in the
direction of the arrow and remove it from the vacuum
cleaner (see Figure 23).
Insert the new HEPA filter and clip into place.
Replacing the micro active carbon filter
22*
Figure
Open the dust bag compartment lid (see Figure 18).
Release the filter holder by moving the locking lever in
the direction of the arrow.
Remove the micro active carbon filter.
Insert the new micro active carbon filter into the vacuum
cleaner and clip into place.
Replacing the micro-hygiene filter
23*
Figure
Open the dust bag compartment lid (see Figure 18).
Release the filter holder by pressing the locking tab in the
direction of the arrow
Remove the foam filter and micro-hygiene filter.
Insert the new micro-hygiene filter and foam filter into the
filter holder.
Insert the filter holder into the vacuum cleaner and clip
into place.
If you have used the vacuum cleaner for fine dust particles,
clean the motor protection filter by knocking out the dirt
and, if necessary, replace the micro hygiene filter, active
carbon filter or HEPA filter.
New filter holders and foam filters can be ordered from
after-sales service.
Filter holder replacement part number: 491618
Foam filter replacement part number: 491620
All manuals and user guides at all-guides.com
Care
Always switch off the vacuum cleaner and disconnect the
power cord from the mains before cleaning the vacuum
cleaner.
The vacuum cleaner and plastic accessories can be
cleaned with a commercial plastic cleaner.
!
The dust compartment can, if necessary, be cleaned with a
second vacuum cleaner or simply wiped with a dry cloth or
dusting brush.
Subject to technical modifications.
Do not use a scourer, glass-cleaning agent or all-
purpose cleaning product.
Never immerse the vacuum cleaner in water.
11

Publicité

Table des Matières
loading

Table des Matières