Aerian CO2TIMER Manuel D'utilisation page 5

FEET ASSEMBLY
Before using the heater, the feet must be fitted to the bottom of the heater.
1. Turn the heater upside down on a rug or soft surface.
2. Attach the feet onto the bottom of the heater at each side.
3. Secure the feet with the supplied screws.
4. Return the heater to its upright position.
Align the big hole on the bottom of
the heater with the hole on the feet.
Align the small hole on the bottom of
the heater with the groove on the feet.
EN-4
Screws
Feet