Checks; Check Times; Visual Inspection; Functional Inspection - KUKKO Y-57 Serie Mode D'emploi

KUKKO Tool factory
Series Y-57
EN
38

9. checks

9.1. check times

initial startup
Operation after extend-
ed downtime
normal operation
Operation in a new
application

9.2. Visual inspection

Check the nut splitter for external damage. Check the sharpness
of the chisel.

9.3. Functional inspection

Install the hydraulic nut splitter as described. Move the chisel back
and forth a few times according to the description.

9.4. check for safe preparation and use

Check whether the full operating instructions are available and
have been read and understood.
Make sure that the tool is suitable for the intended purpose.
Make sure that users are able to use the tool correctly and safely.
Make sure that the product is complete and in perfect working
condition.
Visual inspection Functional
inspection
x
x
x
x
Check for safe prepa-
ration and use
x x
x
x x
A world in motion
since 1919!