Storage And Protection During Interruption Of Normal Use; Repacking For Shipment; Intended Recipients Of The Operating Instructions; Operation - KUKKO Y-57 Serie Mode D'emploi

KUKKO Tool factory
Series Y-57
EN
34
5.6. storage and protection during interruption of
normal use
Warning: Do not leave the nut splitter under pressure if work has
to be interrupted.
Warning: Do not leave the installed nut splitter unattended.
Relieve the pressure on the nut splitter first and then remove it
from the workpiece you are working on. Store the nut splitter
safely. Do not leave any parts in the work area.
If possible, store the hydraulic nut splitter in the tool case supplied
with it.

5.7. repacking for shipment

Ensure that the hydraulic nut splitter is not pressurized. If the
hydraulic nut splitter is part of a hydraulic system, remove it from
the hydraulic system as described. Store the nut splitter in the
supplied tool case. Store the tool case in a suitable box. The box
should then be filled with protective filling material.

5.8. intended recipients of the operating instructions

These operating instructions are intended for use by users of the
product. If you have any further questions, please contact the
customer service team.

6. Operation

6.1. safe operation

Prepare the tool for operation as described in 5.5. Installation and
mounting.
Warning: During operation, keep your hands at a safe distance
from the splitting chisel of the nut splitter. Non-compliance may
lead to severe hand injuries.
A world in motion
since 1919!