Haier XQJ100-96A Guide De L'utilisateur page 20

All manuals and user guides at all-guides.com
XQJ100-96A manual 10/22/01
English
3. Connect the other end to their respective washer inlet located at the
rear of the washer.
Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F.
(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4. Install the drain hose hook to the outer drain hose tube. Using the drain
hose clamp, attach the drain hose to the unit as shown below.
5. Plug in the Washer to a regular 115 volt / 60 Hz, 15 amp outlet.
19
11:30 AM Page 20