Symmons Origins S-9603-PLR Manuel D'utilisation Et D'entretien page 4

Installation
Note:
For valve body installation, please
see valve body manual.
1) Attach diverter handle or volume
control handle (F) to shower
escutcheon (E).
E
F
2) Install shower escutcheon (E) to
shower valve. Secure with two
screws (D).
E
D
3) Install dome cover (C) to valve.
Turn clockwise to secure.
C
4) Install handle (A) to valve. Secure
with set screw (B).
A
B
Note: Handle should be facing the
6 o'clock position.
5) Install tub spout (G) to pipe fitting.
Turn clockwise to secure.
G
6) Remove slide bar ends (J1) from
slide bar flanges. Using flanges
as a guide, drill 1/8" pilot holes
into studs or wood blocking. With
slide bar (J) in position, secure to
wall using screws (I). Attach slide
bar ends (J1) to bar flanges.
I
J
J1
Note: Slide bar must be secured
with at least two of the three
screws (I) at each end.
4
7) Disassemble slide assembly (L).
L4
2
8) Install slide assembly (L) to slide
bar (J). Flat edge on (L2) and (L3)
must be aligned. Arrows on (L2)
and (L4) indicate bottom side.
L2
L4
Note: Adjust screw cap (L1) for ease
of movement of slide assembly.
L1
L2
L3
J
L1
SLIDE
L3
LOCK
SLIDE