Inserting The Batteries; Positioning The »Ibell; Positioning The Mobile Phone; Call/Text Message Received Confirmation - HumanTechnik iBell Mode D'emploi

Getting started

Inserting the batteries

The device needs three 1.5 V batteries (AA type) to work.
To insert the batteries, proceed as follows:
1. Press down firmly on the lid of the battery compartment on the back of the
»iBell«, on the area marked with
2. Now insert three AA type batteries into the battery compartment.
Ensure the right polarity is selected for the batteries.
3. Now close the battery compartment lid.
As soon as the batteries have been inserted, a white chaser light on the »iBell«
will briefly blink.
Battery Level Indication (Self Test):
Use the self-test function to verify that your »iBell« is powered on, and the batte-
ries are working properly: While the »iBell« is idle, simply press the reset button.
»iBell« will then blink twice to indicate that the unit is in operation.
Low Battery Indicator:
An incessantly flashing red light indicates that battery power is low. If the battery
power becomes too weak for the device to operate, it switches off automatically.
If the battery level indicator flashes repeatedly, please change the batteries, as the
»iBell« may cease to function until they are replaced.
Positioning the »iBell«
Place the »iBell« on a flat, non-vibrating surface.
Suitable surfaces: tables, shelves etc.
Unsuitable surfaces: tumble dryers, washing machines etc.

Positioning the mobile phone

1. Switch your mobile phone to vibration alarm. If your mobile phone has
variable vibration settings, select the alarm with the longest and strongest
vibration.
16 English
BA_IBell_2015.indd 16-17
All manuals and user guides at all-guides.com
.
2. Carefully place your mobile phone onto the »iBell« cradle.
Please note: if the mobile phone is not inserted carefully, the movement
may be interpreted as a vibration, causing »iBell« to trigger it's light.
Should this happen, press the Reset button to acknowledge the signal.

Call/text message received confirmation

After receiving a call or a text message, you must confirm it has been received
so that the »iBell« can report new calls or text messages.
Press the reset button on the front of the »iBell« to acknowledge the signal.
The device has now been reset and can report new calls and text messages
again.
Connecting the »iBell« with Humantechnik alerting systems
The »iBell« can easily be connected to the Humantechnik alerting systems
»lisa RF« and »signolux«. Alerting systems consist of at least one transmitter
and one receiver.
lisa RF:
Connect the »iBell« to the »lisa RF telephone
transmitter acoustic« (not included) via the
included connection cable.
Signolux:
Connect the »iBell« via the included con-
nection cable to socket #1 of the »signolux
Acoustic Universal Transmitter« (not inclu-
ded).
»lisa RF«
receiver
»iBell«
transmitter
»signolux«
English 17
06.05.2015 10:32:01