Table des Matières
Publicité
Graisse
®
Multifak
T EP 2
Approvals, performance and recommendations
Performance
Multifak T EP 2
Typical characteristics
Test
NLGI class
Product number
Appearance
Soap type
Penetration after processing, 60x, mm/10
Drop point, °C
Type of base oil
Base oil viscosity at 40°C, mm²/s
Emcor corrosion test
Copper corrosion 24 hours at 120°C
Static water resistance
Four-cone test EP, N
The information provided in the specific data is not a specification but an indication based on current production and may be affected by permitted
production tolerances. The right to make adjustments is reserved. This replaces all previous editions and the information contained therein.
Disclaimer Chevron assumes no responsibility for any loss or damage incurred as a result of using this product for purposes other than those specifically
stated in product data sheets.
Health, Safety, Storage, and Environment Based on currently available information, this product is not expected to produce adverse effects on health when
used for the intended application and in accordance with the recommendations provided in the Material Safety Data Sheet (MSDS). MSDS's are available
upon request through your local sales contact office, or via the Internet. This product should not be used for purposes other than its intended use. Please
respect the environment and local regulations when disposing of the used product.
© 2011 Chevron Products UK Limited. All rights reserved.
All trademarks are property owned by Chevron Intellectual Property LLC.
62
Follow-up
DIN 51 502
ISO 6743-09
KP 2K-20
ISO-L-XBCEB2
Test methods
DIN 51 818
-
-
DIN ISO 2137
DIN ISO 2176
-
DIN 51 562
DIN 51 802
DIN 51 811
DIN 51 807/1
DIN 51 350/4
Operating temperature
-20°C to +130°C with
short periods up to 150°C
Results
2
32064
Light brown
Lithium
265-295
Circa 190
Semi-synthetic
680
0/0
1B
0-90
2.600
EU v1 27 April 2010
®
Multifak
T EP 2
peetersgroup.com
Publicité
Table des Matières
