Panasonic ES-EL9A Mode D'emploi page 25

The appliance stops
during operation.
Cannot
remove hair.
The hair
becomes
stubble.
The appliance
is not
removing the
hair as well
as before.
Sensitive
area cap
comes off
during
operation.
The appliance
is not cutting
as well as
before.
EL9A-7A v3.indb 25
Problem
The appliance is
pressed against
skin too hard.
Not charged fully.
The appliance is
used on long hair.
The way the
appliance is applied
or moved is not
correct.
Hair dust has
accumulated.
When
The skin protector
epilating
or discs are
deformed, cracked,
or damaged.
The appliance is
pressed against
skin too hard.
The appliance is
not applied at a 90°
angle to your skin.
Hair dust has
accumulated.
The blade is
deformed.
When
shaving
The blade is worn
out.
Possible cause Action
Contact to skin with
gentle force.
Fully charge the
appliance.
Use on hair
approximately 2 to
3 mm long.
Refer to page 19.
Clean the hair dust.
Request repair at an
authorized service
centre.
Contact to skin with
gentle force.
(Refer to page 19.)
Apply at a 90° angle
to your skin.
(Refer to page 19.)
Clean the hair dust.
Replace the blade.
Guidelines for
replacement:
Outer foil:
Approximately 1 year
Inner blade:
Approximately 2
years
25
18/11/7 上午11:37