Things to be careful of when filing
• Filing too large an area can result
in even larger calluses forming.
Therefore, be sure to leave some
of the hardened layer.
Before use
a Hardened layer
b Epidermis
c Derma
d Portion to be removed
e Leave some of the hardened
layer
• Filing a single location for a long
time can cause it to become hot
with friction. To avoid this, be sure
to make small changes in the filing
position while filing.
• Filing an area too deeply can cause
it to become sore or inflamed.
• Filing should be performed about
once every two weeks.
Tips for moving the foot care
head
Move in the direction indicated by
the arrows.
Use your free hand to support filing.
(Fig. 16)
EL9A-7A v3.indb 21
<Use on>
Callus
A callus is a
hardened layer that
forms through
repeated pressure
or abrasion.
a Hardened layer
b Epidermis
c Derma
After use
Sonic scrub brush
• We recommend using about once
per week.
• We recommend using on areas for
epilation about 2 days before
actual epilation. Exfoliation may
help to prevent ingrown hairs.
Attach the brush head.
1
1
• Push down firmly until you hear
a "click".
Wet the sonic scrub brush.
2
2
(Fig. 17)
Apply shower gel to your skin.
3
3
Select the mode by pressing
4
4
the power switch [Kr].
Put the sonic scrub brush
5
5
onto your skin and begin
exfoliation. (Fig. 18)
• We recommend using on legs,
arms (especially elbows and
knees) and neckline.
Do not use on sensitive areas
of skin, face or throat.
• Do not continue to hold in one
place. Slide over skin in a
circular pattern.
• Apply to the same area of skin
for approximately 30 seconds
each time, check your skin and
adjust usage accordingly.
Press the power switch to
6
6
turn off the power.
• Moisturise by applying a
moisturiser that suits your skin
on the area where the sonic
scrub brush was used.
Cleaning
• Always clean the heads and caps
after use to keep them in a
hygienic state.
• Switch off and unplug the
appliance before cleaning.
ES-EL9A
21
18/11/7 上午11:37