Using The Appliance; Preparing The Laundry; Setting A Programme - AEG LAVATHERM 5127AC Notice D'utilisation

Masquer les pouces Voir aussi pour LAVATHERM 5127AC:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

62 www.aeg.com
To make a performance test use the standard programmes which are specified in the EN
61121 document.
3) Delicate (Behoedzaam) activated by default

7. USING THE APPLIANCE

7.1 Preparing the laundry

Dry only the laundry applicable
to dry in the tumble dryer. Make
sure if the laundry is applicable
to dry in the tumble dryer. Do
the check of the fabric mark on
the clothes.
Fabric
mark
Correctly prepare the laundry:
• close zips, button up duvet covers and
attach loose ties or ribbons (e.g. rib-
bons of aprons) - laundry can tangle
• make sure the pockets are empty - re-
move metal items (paper clips, safety
pins, etc.).
• turn items with 2 fabric layers inside
out (e.g. cotton lined anoraks, the cot-
ton fabric layer must be external).
Dry only:
• cotton and linen with Cottons (Katoen)
programmes
• synthetic and mixtures with Synthetic
(Synthetica) programmes
• separately the strong coloured textiles
and the light coloured textiles - col-
ours can bleed
• cotton jersey and knitwear only with
the applicable programmes - items
can shrink
All manuals and user guides at all-guides.com
Property
Applicable to dry in the
tumble dryer
Applicable to dry in the
tumble dryer at standard
temperature
Applicable to dry in the
tumble dryer at decreased
temperature
Not applicable to dry in the
tumble dryer
Do not put more laundry than
the maximum load which is 7kg.
7.2 Loading the laundry
1.
Pull the appliance door
2.
Load loosely the laundry.
3.
Close the appliance door.
CAUTION!
Do not lock the laundry in be-
tween the appliance door and
rubber seal.
7.3 Switching on the appliance
Push the On/Off (Aan/Uit) button to acti-
vate or to deactivate the appliance.
7.4 Auto stand-by function
To decrease the energy consumption,
the automatic stand-by function deacti-
vates the appliance:
• if the Start/Pause button was not
pushed in the time of 5 minutes.
• after 5 minutes from the programme
end.
Push the On/Off (Aan/Uit) button to acti-
vate the appliance.

7.5 Setting a programme

Use the programme dial to set the pro-
gramme.

Publicité

Table des Matières
loading

Table des Matières