Additional Safety Instructions - Kärcher PHG 18-45 Battery Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
a Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of
starting the power tool accidentally.
d Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous
in the hands of untrained users.
e Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many acci-
dents are caused by poorly maintained power
tools.
f Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
5
Battery tool use and care
a Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c When battery pack is not in use, keep it away
from other metal objects, like paperclips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
6
Service
a Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
Hedge trimmer safety warnings
 Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold mate-
rial to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
14
 Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or stor-
ing the hedge trimmer always fit the cutting de-
vice cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter
blades.
 Hold the power tool by insulated gripping sur-
faces only, because the cutter blade may contact
hidden wiring or its own cord. Cutter blades con-
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
 Keep cable away from cutting area. During oper-
ation the cable may be hidden in shrubs and can be
accidentally cut by the blade.

Additional safety instructions

DANGER
flung by the cutting blade or when the cutting tool be-
comes entangled in wires or cords. Inspect the work ar-
ea thoroughly for objects such as stones, sticks, metal,
wires, bones or toys and remove these before using the
● 
device.
Never use the device when persons, espe-
cially children, are within a radius of 15 m of the working
area, because the danger exists of objects being flung
out by the cutting blade.
● 
the device.
Severe injuries through a lack of concen-
tration when working. Do not use the device when under
the influence of drugs, alcohol, or medication, or when
you are tired.
WARNING
use by children, persons with restricted physical, senso-
ry or mental abilities or persons unfamiliar with these in-
● 
structions.
You need an unobstructed view of the
work area in order to be able to recognise any potential
dangers. Use the device only under good lighting condi-
● 
tions.
Before operation, make sure the device, all
control elements, and safety devices are working prop-
erly. Check for loose locks, make sure all protective cov-
ers and handles are properly and securely fastened.
Only use the device when it is in a correct condition.
● 
Replace any worn or damaged parts before operating
● 
the device.
Wear long, heavy trousers, clothing with
long arms and non-slip boots when working with the de-
vice. Do not work barefoot. Do not wear sandals or short
trousers. Avoid wearing loose clothing or clothing with
cords and straps.
ance. Avoid an abnormal posture, keep a stable, safe
footing and maintain your balance.
device with both hands. Hold the front handle with one
hand. With the other hand hold the rear handle, operate
the trigger lockout button and the trigger.
wear the carrying belt provided when using the device.
The carrying belt is fitted with a quick-release buckle.
The carrying belt helps you to control the device when it
is lowered after cutting and to hold the weight of the de-
vice during cutting.
rying belt and the quick-release buckle before using the
device. Do not wear clothing over the carrying belt or
otherwise interfere with access to the quick release
● 
buckle.
Risk of electric shock. Do not work with the
device within 10 m of overhead lines.
the device in the vicinity of posts, fences, buildings or
other immovable objects.
are sharp. Wear sturdy protective gloves and work care-
fully when installing, replacing, cleaning or checking the
seating of screws.
English
● 
Severe injuries when objects are
● 
No changes may be made to
● 
The device is not intended for
● 
Risk of kickback due to loss of bal-
● 
Always hold the
● 
● 
Familiarize yourself with the car-
● 
Do not operate
● 
The blades on the device
● 
Replace any worn or damaged
You must

Publicité

Table des Matières
loading

Table des Matières