Orbegozo FH 5034 Manuel D'instructions page 12

Masquer les pouces Voir aussi pour FH 5034:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FH 5034
- Remove the mains plug from the wall socket.
- Let the heater cool down for 30 minutes.
- Check if the heater had been placed correctly.
- Check if anything is obstructing the air flow.
- If necessary, clean the grilles with a vacuum cleaner.
- Replace the plug into the wall socket and switch the heater on again.
If the safety device again switches off the heater:
- Remove the mains plug from the wall socket.
- Have the heater inspected by a Service Centre or by your dealer.
CLEANING
We recommend that you clean your heater at least twice a year to remove accumulated dust and dirt.
- Set the selector switch to position
the heater to cool down sufficiently.
- You may clean the outside of the heater with a damp cloth or brush. Do not use water or allow water to
come into the appliance. Do not use any abrasive and caustic cleaning agents!
- Never touch the heater in water! Danger to life!
- Clean the air inlet and outlet grilles regularly with a vacuum cleaner, using the brush attachment.
STORAGE
Keep the original box in which the heater was packed to store it during the warmer months when it is not in
use. Pack the heater in the original box and store it in a cool, dry place.
Item
Symbol
Heat output
Nominal heat
P
nom
output
Minimum heat
P
min
output
(indicative)
Maximum
P
max,c
continuous heat
output
Auxiliary electricity consumption
At nominal heat
el
max
output
At minimum heat
el
min
output
In standby mode
el
SB
to switch off. Remove the mains plug from the wall socket. Wait for
Value
Unit
Item
Type of heat input, for electric storage local space heaters
only (select one)
2.0
KW
manual heat charge control, with integrated thermostat
1.0
KW
manual heat charge control with room and/or outdoor
temperature feedback
2.0
KW
electronic heat charge control with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room temperature control (select one)
KW
1.878
KW
single stage heat output and no room temperature
0.953
control
0
W
Two or more manual stages, no room temperature control
with mechanic thermostat room temperature control
with electronic room temperature control
electronic room temperature control plus day timer
electronic room temperature control plus week timer
Other control options (multiple selections possible)
room temperature control, with presence detection
room temperature control, with open window detection
with distance control option
with adaptive start control
with working time limitation
Unit
[no]
[no]
[no]
[no]
[no]
[no]
[yes]
[no]
[no]
[no]
[no]
[no]
[no]
[no]
[no]
12

Publicité

Table des Matières
loading

Table des Matières